• home
  • -
  • finishing the outer edge of a deck

finishing the outer edge of a deck

  • decking. veranda® decking . the finished deck layout will result in better looking finished projects. failure to follow . the outer edge of the joist. space no more than 12" (30 .

    Free SampleGet PriceContact
  • deck locked or barred until you're finished! you'll need all . they're not necessary on the ends of joists that rest on a beam, even if they project over the edge . in our situation, we mounted the outer one flush with the deck's outer trim board to get maximum stair width.

    Free SampleGet PriceContact
  • outer edge of the plate, as well as a soleplate for the studs resting either directly on . furring boards long thin strips of wood used to make existing surfaces support the finished surface, in this case the deck.

    Free SampleGet PriceContact
  • finish the edge of the deck and hide the underneath support joists. many brands of decking actually offer fascia that will match the deck boards. however, if you are looking for a nice contrast in your deck design, you may want to opt for a fascia of cellular pvc such as azek trim.

    Free SampleGet PriceContact
  • finished edge along the outside of your deck. perimeter strips will most likely need to be butted to picture frame the outer edges of the deck. if the deck has a rail system, it is recommended you butt the perimeter strips at the post.

    Free SampleGet PriceContact
  • deck building - installing decking boards is one of the final steps in building a deck. make sure the . to get the best finished look start installing decking boards or composite material from the outside edge of the deck first. this way you can . a one to two inch overhang beyond the outer fascia board is sufficient. this means .

    Free SampleGet PriceContact
  • before you install your last line of decking boards, you will need to trim your joists by measuring from the outer edge of the next to the last row of decking boards to a point on the joists that equals the gap between boards plus the width of one board, mark the ends of the joists at this point and draw a line .

    Free SampleGet PriceContact
  • deck to determine how much extra material you will need for the fascia. cut the boards so they fit snugly around the base of the deck. if you like, leave a small lip underneath the deck's surface. some homeowners even finish off the deck edge with bullnose trim. attach the boards to the rim .

    Free SampleGet PriceContact